Thursday, April 19, 2012

sew | changing table part two ~ pad and cover

As promised, here is the follow up to the changing table topper/caddy post.

If you happened to read the first post, you know that we don't really have room in our bedroom for an actual changing table along with everything else. You also know that the dresser we will be using as a changing table is a few inches short of most commercial changing pads. The easiest fix was to make one myself using high density foam. I wrote the directions below purposely without specific measurements because if you want to make one for yourself you have to customize it to your space anyways.

Materials:
High density foam (between 2 and 3 inches tall) cut to fit your dresser top/changing table (you can find foam at most fabric and craft stores)
Approximately 1 yard of PUL or vinyl fabric for inner waterproof cover
Approximately 1 yard decorative fabric for outer cover (I personally like the feel of minky fabric but any cute cotton fabric will work)
5/8 inch elastic -- the length of the elastic is up to you depending on how tightly you want your cover to fit

Take the length and width measurements of your foam and add 8 inches to each -- these will be the measurements you use the cut your fabric (see left side of diagram below). Once your fabric is the proper size, cut a 7.5 inch square out of each corner. The easiest way to do this is to fold your fabric in half lengthways and then again in half width ways and cut the square from all four layers at once (see the right side of the diagram). Make sure you cut from the corner with all four loose edges. You don't want to accidentally cut the wrong corner and end up with a hole in your fabric! Just FYI, these are the same basic principles you use when making a fitted crib sheet so check out this tutorial for a more detailed explanation and pictures.

Next, pin the right sides of each cutout together and sew with a straight seam creating 4 corners that will fit snugly around your pad (I recommend checking the fit before sewing). To create the elastic casing, fold the edge of the fabric over approximately 1/2 inch then another 3/4 inch and pin all the way around. Sew with a straight seam as close to the top edge of the casing as possible, leaving a one inch gap to feed the elastic through the casing. Attach a safety pin to one end of the elastic and feed the elastic all the way around the casing. Sew the ends of your elastic together and close up the one inch opening. That's it, you're done!

Use these directions to make both the waterproof inner cover and the decorative outer cover. In fact, you should probably make a couple outer covers so you always have a clean one handy. I made my outer cover a little bigger than the inner cover just because I wanted the inner cover really snug so it won't come off when I change the outer cover.



Tuesday, April 17, 2012

sew | maternity dress

The past couple weeks have turned out to be a rather awkward time for me in regards to dressing myself. Mondays-Fridays are usually fine as I have plenty of casual, nanny appropriate choices but Sundays and special occasions have been challenging. Most of my regular clothes still fit, and I'm starting to fit maternity stuff as well, but sometimes it feels like I'm too in between and neither category really looks that great on me. Dresses are surprisingly difficult because my normal dresses don't hang right over my belly but maternity dresses have too much additional fabric to accommodate a farther along belly (which I know I'll be thankful for very soon). This all became very apparent last Friday night after I had tried on every single dress in my closet, regular and maternity, and decided in embarrassingly hormonal style that I had absolutely nothing to wear to our nephew's baptism the next morning.

I've been using a pattern for a loose tunic style shirt since I was in high school. I've used it so many times because it's incredibly versatile and only has four pattern pieces (and no zipper!!). I had thought in the past that it might also work well as a maternity dress thanks to the loose design and pleats but hadn't tried out that theory. Well no time like the present and no motivation quite like utter desperation! I added extra length to the front and back pieces and cap sleeves but otherwise just used the basic pattern (New Look 6705 available at Wal-Mart for a couple bucks if anyone is interested in making one).   It makes a perfect in between dress, enough fabric in the front to accommodate my growing belly but not so much that it overwhelms my frame. I'm hoping it will continue to fit for a couple more months, but even if it doesn't this pattern could easily be adjusted for even more room in the front!
After our nephew's baptism
Since you already know my options are limited, I also wore it to church the next day. :)
Just FYI, this dress (and really almost any maternity dress) should probably be belted or it looks very muumuu-ish.   Somewhat along the lines of these gems of pregnancy past...
via

Monday, April 16, 2012

food | easy biscuits



I made these a couple weeks ago on a Sunday afternoon.  They are so delicious.  And easy.  We're talkin' lazy Sunday afternoon easy. Like make in between naps easy.

Check out the recipe here.

Now if you're thinking that mine don't look quite like the ones from the recipe, you'd be right.  I may have not gotten everything exactly like I was supposed to.  Like how I wasn't really paying attention when I pulsed the butter in the food processor and completely obliterated it instead of leaving it in "pea sized" chunks.  Or how I accidentally used the 3/4 measuring cup instead of the 1 cup when doling out the flour (to be fair, the identifying fractions have worn off all my measuring cups so I go based on relative size and grabbed the biggest one I saw, forgetting that I had one in the dishwasher). Come to think of it, as I was actually making these in between naps, I may not have been completely awake which may have contributed to these problems. I didn't notice my flour error until I had already dumped the dough out to be kneaded, so I just added in some extra flour until the dough felt about how I thought it should.  Even after all that they still came out looking, and more importantly, tasting like biscuits.  That, my friends, is just how easy and fool-proof this recipe is.  Will they be better, lighter, and flakier if I actually follow all the directions next time? Probably. But we ate them all anyways.

build | changing table part one ~ topper and caddy

We really want to have the baby in our room for the first 6 months or so, but we were a little apprehensive about how we would fit everything  in our room. We usually have two dressers in our room but decided that, with the addition of the nursery furniture, we would only keep the shorter of the two dressers in our room and use the top as a changing table.  Our dresser top is just a couple inches too short to comfortably fit most commercial changing pads, but I figured I could make one with a little foam and some PUL fabric for a cover.  I also like the added security of a changing table topper (not that I ever plan on leaving the baby on the changing table, but it keeps the pad from sliding around).  These changing table topper/dresser combos are what I loosely based my design on:
via

via
I love the attached caddy on these toppers but our dresser is already on the short side. I decided to try attaching a caddy to the side of the dresser instead and see if that would provide us with a little more functionality.

I built two simple box frames using a 12' 1x4 -- a large box for the topper and a small one for the caddy. I predrilled and used 1 1/2" screws to put it all together, then filled in holes with wood putty. I sanded and topped it all off with two coats of leftover paint from when I originally painted the dresser.

Building the topper and caddy in my dining room workshop



I used two corner braces as the primary means of securing the caddy to the side of the dresser, but I also put a couple screws through the inside wall of the dresser into the caddy for added strength. I secured the changing table topper to the dresser with two mending plates screwed into the back side of both.

Here are the basic supplies and dimensions I used for this project:
(1) 12' 1x4 primed pine board
(2) corner braces
(2) mending plates
A thick piece of heavy duty cardboard for the bottom of the caddy
Lots of 1 1/2" screws
Wood putty
Sandpaper
Paint

If you don't have the ability to cut your board at home, Home Depot and Lowes will cut your board for free. You will need to adjust the dimensions to fit your dresser but this will hopefully give you a starting point.

Topper:
2 pieces cut at 29"
2 pieces cut at 14"

Caddy:
2 pieces cut at 12"
2 pieces cut at 8"

You can get all those cut from one 12' board with a little left over.

Interesting fact, did you know that a 1x4 board isn't actually 1" by 4"? It's actually 3/4" by 3 1/2". I always have to remember that little fact when I'm designing projects, sometimes a 1/2" makes all the difference!

Stay tuned to see the changing pad and cover...

Thursday, April 12, 2012

baby | 20 weeks and it's a......

Halfway.  Wow.  It's crazy how quickly the time has passed since we found out we were expecting our baby!

We had our ultrasound last week and it went really well!   It was so fun "seeing" our baby, and they sent us home with some great pictures -- the 3D pictures of the face are especially cool.

I know a lot of you have been asking, so here comes the big news.  As some of you know, we had been going back and forth on if we wanted to find out the gender of our sweet baby at the ultrasound.  Well we finally decided the night before our appointment that, assuming our baby cooperated, we did want to find out.   The ultrasound tech was able to tell within the first minute of the ultrasound, and it is with great joy that we look forward to welcoming a baby girl!

Already a cutie!  She kept her hands up by her face for the entire ultrasound which made it a little difficult for the tech to get a few of the pictures she needed, but we thought it was pretty cute.
From the initial look at the ultrasound, the doctor said that she (!!!) is right on track for growth but officially adjusted my due date from August 31st to September 2nd.

In other news, starting about a week ago I've been able to clearly feel her moving!  Actually, the first time I was positive I felt her move Isaac was able to feel her too!   We were laying in bed and he had his hand on my belly when all of a sudden he looked at me and said, "did you feel that?" right as I said, "did you feel that?".  There were a couple times in weeks previous when I thought I might have felt something but was never able to tell for sure until that night.   I don't know if it's just because I'm finally able to recognize what I was feeling all along, or if we just reached the point where her movements are discernible, but ever since that evening I've been able to feel her moving multiple times a day.   I also gained my first prego pound this week - good things happening all around!

And just in case you were wondering, we have already chosen her name, but we plan to keep it a secret until she's born. :)

Monday, April 2, 2012

baby | custom burp cloths round 2

You can find my first post here.  At the recommendation of my sister-in-law, who is a new mom herself, I tried a different burp cloth shape with the extra fabric I purchased:
You can find the pattern and tutorial here.

These are perfect!  They fit on your shoulder SO well, they don't slide off, and the coverage is fantastic. They are longer than the first set I made (which is exactly what I wanted), but the true beauty is in the contoured side.  Thanks for the recommendation, Kris!     

Saturday, March 31, 2012

celebrate | easter surprises

Earlier this week, my little helper assisted me in sending out some Easter surprises to family members.  Did you know you can send Easter eggs through the mail?  Just find some large eggs, fill, tape the seam to secure for shipping, and take em' to the post office.  I found both the large and the REALLY large eggs at our local dollar store.  

See, it really does work! A safely arrived egg (photo credits go to my mother-in-law).

In the past I have mailed blown up beach balls and a message in a (empty) plastic water bottle.  From what I hear, you can also mail bananas, but I've never tried that one.

Do you know of any other unusual items you can send through the mail?
Related Posts Plugin for WordPress, Blogger...